Ask anything. DocsOcean finds the answer in thousands of pages and shows you where it is.
Request a demoHow it worksWhen did the supplier learn about the defect?
Thousands of pages — and you need one sentence
Half a day to find a date or an amount
Rereading everything before every hearing
DocsOcean takes care of it.
Press “Show in the original” — the case page opens with the exact place highlighted.
What do we know about the seal defect?
TEST REPORT No. 7
Samara2 March 2019
A commission of the quality inspector, the shop foreman and the customer’s representative tested a pilot batch of seals made for a future delivery.
The test ran at a pressure of 16 MPa for 72 hours, at temperatures from −20 to +40 °C.
Results: 9 of 40 samples leaked at the sealing ring.
The seal defect was confirmed, and the Supplier’s director was informed.
The commission recommends reworking the seal design before serial deliveries begin.
SUPPLY CONTRACT No. 14/2019
Samara14 March 2019
Example Steel LLC (“the Supplier”), represented by its general director acting under the charter, and Example Assembly LLC (“the Buyer”) have entered into this contract as follows.
1. Subject of the contract
1.1. The Supplier shall deliver, and the Buyer shall accept and pay for, shut-off valves with seals (“the Goods”) in the quantities and on the dates set out in the specification.
1.2. The quality of the Goods shall meet the technical specifications and the applicable standards.
Conclusions
On the questions put by the court, the expert reached the following conclusions.
1. The valve body meets the technical specifications and the applicable standards.
2. The sealing elements were not submitted for examination and were not examined by the expert.
3. The cause of the leak cannot be established without examining the sealing elements.
Printed text, scans, photos, even handwriting — our technology recognizes it all and builds one case database.
Just as you would ask a colleague who has read the whole case.
Confidentiality comes first.
Leave a request — we will get in touch and show DocsOcean at work.
Request a demoTEST REPORT No. 7
Samara2 March 2019
A commission of the quality inspector, the shop foreman and the customer’s representative tested a pilot batch of seals made for a future delivery.
The test ran at a pressure of 16 MPa for 72 hours, at temperatures from −20 to +40 °C.
Results: 9 of 40 samples leaked at the sealing ring.
The seal defect was confirmed, and the Supplier’s director was informed.
The commission recommends reworking the seal design before serial deliveries begin.
SUPPLY CONTRACT No. 14/2019
Samara14 March 2019
Example Steel LLC (“the Supplier”), represented by its general director acting under the charter, and Example Assembly LLC (“the Buyer”) have entered into this contract as follows.
1. Subject of the contract
1.1. The Supplier shall deliver, and the Buyer shall accept and pay for, shut-off valves with seals (“the Goods”) in the quantities and on the dates set out in the specification.
1.2. The quality of the Goods shall meet the technical specifications and the applicable standards.
7. Liability
7.1. For failure to perform or improper performance of their obligations the Parties are liable under the applicable law.
7.2. For late delivery the Supplier shall pay the Buyer a penalty of 0.1% of the value of the undelivered Goods for each day of delay, capped at 10% of the total contract amount.
7.3. Payment of the penalty does not release the Parties from their obligations under the contract.
8. Force majeure
8.1. The Parties are released from liability for non-performance caused by force majeure.
Conclusions
On the questions put by the court, the expert reached the following conclusions.
1. The valve body meets the technical specifications and the applicable standards.
2. The sealing elements were not submitted for examination and were not examined by the expert.
3. The cause of the leak cannot be established without examining the sealing elements.